Slider

Swing Door Technology Exclusively from Win-Dor

Win-Dor Dedicated Truck Route
* Available to dedicated truck route customers ONLY. (Learn More)

Win-Dor's innovative, durable and low-maintenance swing door system is considered among the highest quality swing doors in America.

WinDor’s Swing Door combines a contemporary vinyl sash with aluminum reinforcement, allowing for a durable, yet low maintenance, affordable high quality swing door system that will create a grand focal point in any room.

Our 3750 Swing Door offers a  1 3/4 x 3 ¾ sash profile that is the same as our Multi Slide and Folding door, this will allow homeowners and builders alike to perfectly to mix and match our door systems while maintaining a cohesive look.

All of these features add up to a door that clients love.

Innovative, Durable and Low Maintenance

Locks and Handles

Grid Options

Grid Types

Color Options

Extruded Colors
White
Beige
Standard Colors
Dk Bronze (Painted)
Black (Painted)
Terra Tone (Painted)
Semi-Custom Colors
Silver (Painted)
Beige (Painted)
Taupe (Painted)
Exterior/Interior Laminate Colors
Black (Laminate)
* This color sample is for visual use only. Actual color can vary due to change in light, surface, conditions, etc. Do not use for color matching.

** Exterior colors are painted with a special heat reflective paint designed for energy efficiency and low heat transfer. Paints are non-hazardous EPA standards and exceed all environmental and AAMA performance standards.

Swing Door Technical Documents

Shop Drawings - Standard Size

3750 Swing Door - Out-swing

[PDF] - Single Swing Door - Hinge Left 2680
[PDF] - Single Swing Door - Hinge Left 3080
[PDF] - Single Swing Door - Hinge Right 2680
[PDF] - Single Swing Door - Hinge Right 3080
[PDF] - Double Swing Door - Hinge Left 5080
[PDF] - Double Swing Door - Hinge Left 6080
[PDF] - Double Swing Door - Hinge Right 5080
[PDF] - Double Swing Door - Hinge Right 6080

3750 Swing Door - In-swing

[PDF] - Single Swing Door - Hinge Left 2680
[PDF] - Single Swing Door - Hinge Left 3080
[PDF] - Single Swing Door - Hinge Right 2680
[PDF] - Single Swing Door - Hinge Right 3080
[PDF] - Double Swing Door - Hinge Left 5080
[PDF] - Double Swing Door - Hinge Left 6080
[PDF] - Double Swing Door - Hinge Right 5080
[PDF] - Double Swing Door - Hinge Right 6080

Shop Drawings - Custom Size

3750 Swing Door - Out-swing

[PDF] - Single Swing Door - Hinge Left
[PDF] - Single Swing Door - Hinge Right
[PDF] - Double Swing Door - Hinge Left
[PDF] - Double Swing Door - Hinge Right

3750 Swing Door - In-swing

[PDF] - Single Swing Door - Hinge Left
[PDF] - Single Swing Door - Hinge Right
[PDF] - Double Swing Door - Hinge Left
[PDF] - Double Swing Door - Hinge Right

Elevation Drawings

3750 Swing Door Elevation Outswing

[PDF] - Complete Series
[DWG] - Complete Series
[DWG] - Single Swing Door
[DWG] - Single Swing Door Left Sidelight
[DWG] - Single Swing Door Right Sidelight
[DWG] - Single Swing Door with Sidelights
[DWG] - Double Door
[DWG] - Double Door with Left Sidelight
[DWG] - Double Door with Right Sidelight
[DWG] - Double Door with Sidelights

3750 Swing Door Elevation Inswing

[PDF] - Complete Series
[DWG] - Complete Series
[DWG] - Single Swing Door
[DWG] - Single Swing Door Left Sidelight
[DWG] - Single Swing Door Right Sidelight
[DWG] - Single Swing Door with Sidelights
[DWG] - Double Door
[DWG] - Double Door with Left Sidelight
[DWG] - Double Door with Right Sidelight
[DWG] - Double Door with Sidelights

Section Views

1" Nail Fin - Outswing

[PDF] - Outswing HL
[DWG] - Outswing HL
[PDF] - Outswing HL - Right Sidelight
[DWG] - Outswing HL - Right Sidelight
[PDF] - Outswing HL - Left Sidelight
[DWG] - Outswing HL - Left Sidelight
[PDF] - Outswing HL - with Sidelights
[DWG] - Outswing HL - with Sidelights
[PDF] - Outswing Double Door HL
[DWG] - Outswing Double Door HL
[PDF] - Outswing Double Door HL - left Sidelight
[DWG] - Outswing Double Door HL - left Sidelight
[PDF] - Outswing Double Door HL - Right Sidelight
[DWG] - Outswing Double Door HL - Right Sidelight
[PDF] - Outswing Double Door HL - with Sidelights
[DWG] - Outswing Double Door HL - with Sidelights
[PDF] - Outswing HR
[DWG] - Outswing HR
[PDF] - Outswing HR - Right Sidelight
[DWG] - Outswing HR - Right Sidelight
[PDF] - Outswing HR - Left Sidelight
[DWG] - Outswing HR - Left Sidelight
[PDF] - Outswing HR - with Sidelights
[DWG] - Outswing HR - with Sidelights
[PDF] - Outswing Double Door HR
[DWG] - Outswing Double Door HR
[PDF] - Outswing Double Door HR - Right Sidelight
[DWG] - Outswing Double Door HR - Right Sidelight
[PDF] - Outswing Double Door HR - left Sidelight
[DWG] - Outswing Double Door HR - left Sidelight
[PDF] - Outswing Double Door HR - with Sidelights
[DWG] - Outswing Double Door HR - with Sidelights

1 3/8" Nail Fin - Outswing

[PDF] - Outswing HL
[DWG] - Outswing HL
[PDF] - Outswing HL - Left Sidelight
[DWG] - Outswing HL - Left Sidelight
[PDF] - Outswing HL - Right Sidelight
[DWG] - Outswing HL - Right Sidelight
[PDF] - Outswing HL - with Sidelights
[DWG] - Outswing HL - with Sidelights
[PDF] - Outswing HR
[DWG] - Outswing HR
[PDF] - Outswing HR - Left Sidelight
[DWG] - Outswing HR - Left Sidelight
[PDF] - Outswing HR - Right Sidelight
[DWG] - Outswing HR - Right Sidelight
[PDF] - Outswing HR - with Sidelights
[DWG] - Outswing HR - with Sidelights
[PDF] - Outswing Double Door HL
[DWG] - Outswing Double Door HL
[PDF] - Outswing Double Door HL - Left Sidelight
[DWG] - Outswing Double Door HL - Left Sidelight
[PDF] - Outswing Double Door HL - Right Sidelight
[DWG] - Outswing Double Door HL - Right Sidelight
[PDF] - Outswing Double Door HL - with Sidelights
[DWG] - Outswing Double Door HL - with Sidelights
[PDF] - Outswing Double Door HR
[DWG] - Outswing Double Door HR
[PDF] - Outswing Double Door HR - Left Sidelight
[DWG] - Outswing Double Door HR - Left Sidelight
[PDF] - Outswing Double Door HR - Right Sidelight
[DWG] - Outswing Double Door HR - Right Sidelight
[PDF] - Outswing Double Door HR - with Sidelights
[DWG] - Outswing Double Door HR - with Sidelights

1" Nail Fin - Inswing

[PDF] - Inswing HL
[DWG] - Inswing HL
[PDF] - Inswing HL - Left Sidelight
[DWG] - Inswing HL - Left Sidelight
[PDF] - Inswing HL - Right Sidelight
[DWG] - Inswing HL - Right Sidelight
[PDF] - Inswing HL - with Sidelights
[DWG] - Inswing HL - with Sidelights
[PDF] - Inswing HR
[DWG] - Inswing HR
[PDF] - Inswing HR - Left Sidelight
[DWG] - Inswing HR - Left Sidelight
[PDF] - Inswing HR - Right Sidelight
[DWG] - Inswing HR - Right Sidelight
[PDF] - Inswing HR - with Sidelights
[DWG] - Inswing HR - with Sidelights
[PDF] - Inswing Double Door HL
[DWG] - Inswing Double Door HL
[PDF] - Inswing Double Door HL - Left Sidelight
[DWG] - Inswing Double Door HL - Left Sidelight
[PDF] - Inswing Double Door HL - Right Sidelight
[DWG] - Inswing Double Door HL - Right Sidelight
[PDF] - Inswing Double Door HL - with Sidelights
[DWG] - Inswing Double Door HL - with Sidelights
[PDF] - Inswing Double Door HR
[DWG] - Inswing Double Door HR
[PDF] - Inswing Double Door HR - Left Sidelight
[DWG] - Inswing Double Door HR - Left Sidelight
[PDF] - Inswing Double Door HR - Right Sidelight
[DWG] - Inswing Double Door HR - Right Sidelight
[PDF] - Inswing Double Door HR - with Sidelights
[DWG] - Inswing Double Door HR - with Sidelights

1 3/8" Nail Fin - Inswing

[PDF] - Inswing HL
[DWG] - Inswing HL
[PDF] - Inswing HL - Left Sidelight
[DWG] - Inswing HL - Left Sidelight
[PDF] - Inswing HL - Right Sidelight
[DWG] - Inswing HL - Right Sidelight
[PDF] - Inswing HL - with Sidelights
[DWG] - Inswing HL - with Sidelights
[PDF] - Inswing HR
[DWG] - Inswing HR
[PDF] - Inswing HR - Left Sidelight
[DWG] - Inswing HR - Left Sidelight
[PDF] - Inswing HR - Right Sidelight
[DWG] - Inswing HR - Right Sidelight
[PDF] - Inswing HR - with Sidelights
[DWG] - Inswing HR - with Sidelights
[PDF] - Inswing Double Door HL
[DWG] - Inswing Double Door HL
[PDF] - Inswing Double Door HL - Left Sidelight
[DWG] - Inswing Double Door HL - Left Sidelight
[PDF] - Inswing Double Door HL - Right Sidelight
[DWG] - Inswing Double Door HL - Right Sidelight
[PDF] - Inswing Double Door HL - with Sidelights
[DWG] - Inswing Double Door HL - with Sidelights
[PDF] - Inswing Double Door HR
[DWG] - Inswing Double Door HR
[PDF] - Inswing Double Door HR - Left Sidelight
[DWG] - Inswing Double Door HR - Left Sidelight
[PDF] - Inswing Double Door HR - Right Sidelight
[DWG] - Inswing Double Door HR - Right Sidelight
[PDF] - Inswing Double Door HR - with Sidelights
[DWG] - Inswing Double Door HR - with Sidelights

Wall Detail Drawings

1" Nail Fin

[PDF] - 1" Nail-fin Outswing
[DWG] - 1" Nail-fin Outswing
[PDF] - 1" Nail-fin Inswing
[DWG] - 1" Nail-fin Inswing

1.375" Nail Fin

[PDF] - 1.375" Nail-fin Outswing
[DWG] - 1.375" Nail-fin Outswing
[PDF] - 1.375" Nail-fin Inswing
[DWG] - 1.375" Nail-fin Inswing

Exploded View

Thermal Test Results
Most Commonly used glass combinations

Structural Test Result: LC-PG30 (Light Commercial - Performance Grade 30)
Test Standard: AAMA/WDMA/CSA 101/1.S.2/A440-17

Unit Tested: Single Outswing - 1 Panel, 38.5625" x 95.5"

  Tested at Measured Allowed
Air Infiltration - ASTM E283-04 1.6 PSF (25 mph) .01 CFM/ft² 0.30 CFM/ft²
Air Exfiltration - ASTM E283-04 1.6 PSF (25 mph) .06 CFM/ft² 0.30 CFM/ft²
Water Resistance - ASTM E547-00 4.59 psf No Leakage No Leakage
Uniform Load Deflection - ASTM E330-14 30.08 psf (108 mph) 0.12" (+) / 0.16" (-) No Damage
Uniform Load Structural Test - ASTM E330-14 45.11 psf (132 mph) 0.038" (+) / 0.038" (-) .36 inches
Forced Entry Resistance - AAMA 1304 Test A, B, & C No Entry No Entry
Operation / Cycle Performance Performance - AAMA 920-11 100,00 cycles Passed Passed

Thermal Test Results

Most commonly used glass combinations

Dual Glazed Thermal Test Results
U-Factor SHGC VT Overall IG Thickness Isolated glass unit as tested
0.35 0.18 0.42 0.875" 3mm Cardinal 366 / Argon / 3mm Clear
0.34 0.18 0.41 0.875" 4mm Cardinal 366 / Argon / 4mm Clear
0.34 0.18 0.41 0.875" 5mm Cardinal 366 / Argon / 5mm Clear
0.31 0.18 0.41 0.875" 3mm Cardinal 366 / Argon / 3mm Cardinal I89
0.31 0.18 0.40 0.875" 5mm Cardinal 366 / Argon / 5mm Cardinal I89
Triple Glazed Thermal Test Results
U-Factor SHGC VT Overall IG Thickness Isolated glass unit as tested
0.28 0.17 0.37 1.25" 3mm Cardinal 366 / Argon / 3mm Clear / Argon / 3mm Cardinal I89
0.27 0.16 0.30 1.25" 3mm Cardinal 366 / Argon / 3mm Clear / Argon / 3mm Cardinal 366

Structural Test Result: LC-PG25 (Light Commercial - Performance Grade 25)
Test Standard: AAMA/WDMA/CSA 101/1.S.2/A440-17

Unit Tested: Single Inswing - 1 Panel, 38.5625" x 95.5"

  Tested at Measured Allowed
Air Infiltration - ASTM E283-04 1.6 PSF (25 mph) .01 CFM/ft² 0.30 CFM/ft²
Air Exfiltration - ASTM E283-04 1.6 PSF (25 mph) .02 CFM/ft² 0.30 CFM/ft²
Water Resistance - ASTM E547-00 3.76 psf No Leakage No Leakage
Uniform Load Deflection - ASTM E330-14 25.06 psf (100 mph) 0.162" (+) / 0.190" (-) No Damage
Uniform Load Structural Test - ASTM E330-14 37.59 psf (120 mph) 0.041" (+) / 0.044" (-) .36 inches
Forced Entry Resistance - AAMA 1304 Test A, B, & C No Entry No Entry
Operation / Cycle Performance Performance - AAMA 920-11 100,00 cycles Passed Passed

Thermal Test Results

Most commonly used glass combinations

Dual Glazed Thermal Test Results
U-Factor SHGC VT Overall IG Thickness Isolated glass unit as tested
0.35 0.18 0.42 0.875" 3mm Cardinal 366 / Argon / 3mm Clear
0.34 0.18 0.41 0.875" 4mm Cardinal 366 / Argon / 4mm Clear
0.34 0.18 0.41 0.875" 5mm Cardinal 366 / Argon / 5mm Clear
0.31 0.18 0.41 0.875" 3mm Cardinal 366 / Argon / 3mm Cardinal I89
0.31 0.18 0.40 0.875" 5mm Cardinal 366 / Argon / 5mm Cardinal I89
Triple Glazed Thermal Test Results
U-Factor SHGC VT Overall IG Thickness Isolated glass unit as tested
0.28 0.17 0.37 1.25" 3mm Cardinal 366 / Argon / 3mm Clear / Argon / 3mm Cardinal I89
0.28 0.16 0.30 1.25" 3mm Cardinal 366 / Argon / 3mm Clear / Argon / 3mm Cardinal 366

Structural Test Result: LC-PG25 (Light Commercial - Performance Grade 25)
Test Standard: AAMA/WDMA/CSA 101/1.S.2/A440-17

Unit Tested: Double Outswing - 2 Panel, 75.375" x 95.5"

  Tested at Measured Allowed
Air Infiltration - ASTM E283-04 1.6 PSF (25 mph) .01 CFM/ft² 0.30 CFM/ft²
Air Exfiltration - ASTM E283-04 1.6 PSF (25 mph) .06 CFM/ft² 0.30 CFM/ft²
Water Resistance - ASTM E547-00 3.76 psf No Leakage No Leakage
Uniform Load Deflection - ASTM E330-14 (Stile) 25.06 psf (100 mph) 0.705" (+) / 0.750" (-) No Damage
Uniform Load Deflection - ASTM E330-14 (Astragal) 25.06 psf (100 mph) 0.730" (+) / 0.699" (-) No Damage
Uniform Load Structural Test - ASTM E330-14 (Stile) 37.59 psf (120 mph) 0.023" (+) / 0.029" (-) .36 inches
Uniform Load Structural Test - ASTM E330-14 (Astragal) 37.59 psf (120 mph) 0.009" (+) / 0.010" (-) .36 inches
Forced Entry Resistance - AAMA 1304 Test A, B, & C No Entry No Entry
Operation / Cycle Performance Performance - AAMA 920-11 100,00 cycles Passed Passed

Thermal Test Results

Most commonly used glass combinations

Dual Glazed Thermal Test Results
U-Factor SHGC VT Overall IG Thickness Isolated glass unit as tested
0.35 0.18 0.42 0.875" 3mm Cardinal 366 / Argon / 3mm Clear
0.34 0.18 0.41 0.875" 4mm Cardinal 366 / Argon / 4mm Clear
0.34 0.18 0.41 0.875" 5mm Cardinal 366 / Argon / 5mm Clear
0.31 0.18 0.41 0.875" 3mm Cardinal 366 / Argon / 3mm Cardinal I89
0.31 0.18 0.40 0.875" 5mm Cardinal 366 / Argon / 5mm Cardinal I89
Triple Glazed Thermal Test Results
U-Factor SHGC VT Overall IG Thickness Isolated glass unit as tested
0.28 0.17 0.37 1.25" 3mm Cardinal 366 / Argon / 3mm Clear / Argon / 3mm Cardinal I89
0.27 0.16 0.30 1.25" 3mm Cardinal 366 / Argon / 3mm Clear / Argon / 3mm Cardinal 366

Structural Test Result: LC-PG25 (Light Commercial - Performance Grade 25)
Test Standard: AAMA/WDMA/CSA 101/1.S.2/A440-17

Unit Tested: Double Inswing - 2 Panel, 75.375" x 95.5"

  Tested at Measured Allowed
Air Infiltration - ASTM E283-04 1.6 PSF (25 mph) .01 CFM/ft² 0.30 CFM/ft²
Air Exfiltration - ASTM E283-04 1.6 PSF (25 mph) .02 CFM/ft² 0.30 CFM/ft²
Water Resistance - ASTM E547-00 3.76 psf No Leakage No Leakage
Uniform Load Deflection - ASTM E330-14 (Stile) 25.06 psf (100 mph) 0.766" (+) / 0.760" (-) No Damage
Uniform Load Deflection - ASTM E330-14 (Astragal) 25.06 psf (100 mph) 1.171" (+) / 0.846" (-) No Damage
Uniform Load Structural Test - ASTM E330-14 (Stile) 37.59 psf (120 mph) 0.001" (+) / 0.026" (-) .36 inches
Uniform Load Structural Test - ASTM E330-14 (Astragal) 37.59 psf (120 mph) 0.001" (+) / 0.069" (-) .36 inches
Forced Entry Resistance - AAMA 1304 Test A, B, & C No Entry No Entry
Operation / Cycle Performance Performance - AAMA 920-11 100,00 cycles Passed Passed

Thermal Test Results

Most commonly used glass combinations

Dual Glazed Thermal Test Results
U-Factor SHGC VT Overall IG Thickness Isolated glass unit as tested
0.35 0.18 0.42 0.875" 3mm Cardinal 366 / Argon / 3mm Clear
0.34 0.18 0.41 0.875" 4mm Cardinal 366 / Argon / 4mm Clear
0.34 0.18 0.41 0.875" 5mm Cardinal 366 / Argon / 5mm Clear
0.31 0.18 0.41 0.875" 3mm Cardinal 366 / Argon / 3mm Cardinal I89
0.31 0.18 0.40 0.875" 5mm Cardinal 366 / Argon / 5mm Cardinal I89
Triple Glazed Thermal Test Results
U-Factor SHGC VT Overall IG Thickness Isolated glass unit as tested
0.28 0.17 0.37 1.25" 3mm Cardinal 366 / Argon / 3mm Clear / Argon / 3mm Cardinal I89
0.28 0.16 0.30 1.25" 3mm Cardinal 366 / Argon / 3mm Clear / Argon / 3mm Cardinal 366